UPORTHOCON 2020

#UPORTHOCON_2020
We participated in UPORTHOCON 2020  Event held in Golden Blossom Resort,Lucknow,UP on 14th to 16th February, 2020.

We exhibited our Orthopaedic Implants like Spinal Implants, Trauma Implants, Joints System and Surgical instruments.

APSS+BSS (Operative Spine Course)

APSS+BSS (Operative Spine Course)

We participated in APSS+BSS 2020  Event held in Andheri,Mumbai from 13th to 16th Feb., 2020

We exhibited our Spinal Implants and Surgical instruments.

TNOACON 2020

We participated in TNOACON 2020  Event held in Kingstone Engineering College, Vellore from 7th  to 9th Feb, 2020.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system &  Hip & Knee Replacement system and instruments.

 

GOACON 2020

#GOACON #Rajkot

We Smit Medimed, Manufacturer & Exporter of the Orthopaedic Implants & Instruments.

We participated in GOACON 2020  Event held in Rajkot< Gujarat from 8th  & 9th Feb, 2020.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system &  Hip & Knee Replacement system and instruments.

OSSAPCON 2020

#OSSAPCON

We Smit Medimed, Manufacturer & Exporter of the Orthopaedic Implants & Instruments.

We participated in OSSAPCON 2020  Event held in Vijaywada, Amravathi from 31st Jan  to 2nd Feb, 2020.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system &  Hip & Knee Replacement system and instruments.

 

Arab Health 2020

#ArabHealth #Dubai

We Smit Medimed, Manufacturer & Exporter of the Orthopaedic Implants & Instruments.

We are very glad to invite you to visit our Booth No.R. P75 at ARAB HEALTH  from 27th to 30th  January, 2020 at Dubai World Trade Centre, Dubai.

We will be presenting our all products range of Trauma Implants, Spine Implants, Joints Replacement System, Intramedullary Nailing System& High Quality of Orthopaedic Instruments.

Your presence will do us great honor and we are looking forward to seeing you. Hope to see you there

IOACON 2019

#IOACON2019

We participated in IOACON 2019  Event held at Biswa Bangla Convention  Centre Kolkata, West Bengal  from 19th to 24th November , 2019.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system, Hip & Knee Replacement system and instruments.

You know what is the Distraction osteogenesis?

Distraction osteogenesis (DO), also called callus distractioncallotasis and osteodistraction, is a process used in orthopedic surgery, podiatric surgery, and oral and maxillofacial surgery to repair skeletal deformities and in reconstructive surgery. The procedure involves cutting and slowly separating bone, allowing the bone healing process to fill in the gap.

Medical Uses

Distraction osteogenesis (DO) is used in orthopedic surgery, podiatric surgery, and oral and maxillofacial surgery to repair skeletal deformities and in reconstructive surgery. It was originally used to treat problems like unequal leg length, but since the 1980s is most commonly used to treat issues like hemifacial microsomia, micrognathism (chin so small it causes health problems), craniofrontonasal dysplasias, craniosynostosis, as well as airway obstruction in babies caused by glossoptosis (tongue recessed too far back in the mouth) or micrognathism.

In 2016 a systematic review of papers describing bone and soft tissue outcomes of DO procedures on the lower jawbone was published; the authors had planned to do a meta-analysis but found the studies were too poor in quality and too heterogeneous to pool. From what they were able to generalize, the authors found there was significant relapse in the vertical plane for bone, and a higher risk of relapse when there was an initial high gonial angle or Jarabak ratio (sella–gonion/nasion–menton). For soft tissue, little evidence was available regarding the vertical dimension, while a 90% correspondence between skeletal and soft tissue was found for sagittal positioning; the dental-to-soft tissue agreement was around 20%.

A 2016 Cochrane review of DO on the upper jawbone to treat cleft lip and cleft palate compared with orthognathic surgery found only one study, involving 47 participants and performed between 2002 and 2008 at the University of Hong Kong. This was not sufficient evidence from which to generalize, but the authors noted that while both procedures produced notable hard and soft tissue improvements, the DO group had greater advancement of the maxillary and less horizontal relapse five years after surgery. There was no difference in speech or nasal emissions outcomes nor in adverse effects; the DO group had lower satisfaction at three months after surgery but higher at two years.

Distraction osteogenesis

Procedure

In the first phase, called the “osteotomy/surgical phase”, the bone is cut, either partially, only through the hard exterior, or completely, and a device is fitted which will be used in the next phases. In the second phase, the latency period, which lasts generally seven days, the appliance is not activated and early stages of bone healing are allowed. In the third phase, the “distraction phase”, the device, which is mounted to the bone on each side of the cut, is used to gradually separate the two pieces, allowing new bone to form in the gap. When the desired or possible length is reached, which usually takes three to seven days, a consolidation phase follows in which the device keeps the bone stable to allow the bone to fully heal. After the consolidation phase, the device is removed in a second surgical procedure.

The device that is used is usually manually operated by twisting a rod that through a rack and pinion system or the like, separates the bone; the rate of separation is carefully determined because going too quickly can cause nonunion, in which unstable fibrous connective tissue is formed instead of bone, and going too slowly can allow premature union to occur. Generally the rate is about a millimeter per day, achieved in two steps per day. The frequency of steps and how much the device is moved at each step, is called the “rhythm”. The devices sometimes contain a spring that provides tension to continually separate the bones, instead of being manually operated at set intervals.

 

Distraction osteogenesis


Despite these manually operated systems there are also motorized systems like the FITBONE from WITTENSTEIN. The FITBONE is a fully implantable, motorized, lengthening and correction nail. Advantages of this device are accurate deformity correction, low scar tissue formation, and reduced risk of infection. Furthermore the patients describe the procedure as more comfortable than limb lengthening with mechanical systems.

Content credit to wikipedia.org

Image credit to researchget.net

FEMECOT 2019

FEMECOT 2019

We participated in Femecot 2019  Event held in Hermosillo,sonora Mexico from 30th October to 1st November, 2019.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system &  Hip & Knee Replacement system and instruments.

VOSCON 2019

VOSCON 2019

We participated in VOSCON 2019  Event held at City Sports Club(CSC) resort, NH-6, Amravti Road, Akola on 19th & 20th October 2019.

We exhibited our Spinal Implants, Trauma Implants, Intramedullary Nailing system, Hip & Knee Replacement System and instruments.

    We offer a wide variety of safe and advanced Orthopedic Implants and fixators. At the helm of the company’s operations is Mr. Vinodbhai, the Director. His enterprising skills and experience in the industry continue to play a pivotal role in the company’s growth.We are based in Ahmedabad city West Part of India.

    ADDRESS

    Plot No.10, Phase-1, B|h. Prashant Eng., G.I.D.C.Vatva, Ahmedabad-382 445, Gujarat, (INDIA).

    PHONE

    +91 9375801932

    EMAIL

    [email protected]

    Cart