Tag Archives: top Orthopaedic implant company in india

OSSAPCON 2020

#OSSAPCON

We Smit Medimed, Manufacturer & Exporter of the Orthopaedic Implants & Instruments.

We participated in OSSAPCON 2020  Event held in Vijaywada, Amravathi from 31st Jan  to 2nd Feb, 2020.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system &  Hip & Knee Replacement system and instruments.

 

Arab Health 2020

#ArabHealth #Dubai

We Smit Medimed, Manufacturer & Exporter of the Orthopaedic Implants & Instruments.

We are very glad to invite you to visit our Booth No.R. P75 at ARAB HEALTH  from 27th to 30th  January, 2020 at Dubai World Trade Centre, Dubai.

We will be presenting our all products range of Trauma Implants, Spine Implants, Joints Replacement System, Intramedullary Nailing System& High Quality of Orthopaedic Instruments.

Your presence will do us great honor and we are looking forward to seeing you. Hope to see you there

IOACON 2019

#IOACON2019

We participated in IOACON 2019  Event held at Biswa Bangla Convention  Centre Kolkata, West Bengal  from 19th to 24th November , 2019.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system, Hip & Knee Replacement system and instruments.

You know what is the Distraction osteogenesis?

Distraction osteogenesis (DO), also called callus distractioncallotasis and osteodistraction, is a process used in orthopedic surgery, podiatric surgery, and oral and maxillofacial surgery to repair skeletal deformities and in reconstructive surgery. The procedure involves cutting and slowly separating bone, allowing the bone healing process to fill in the gap.

Medical Uses

Distraction osteogenesis (DO) is used in orthopedic surgery, podiatric surgery, and oral and maxillofacial surgery to repair skeletal deformities and in reconstructive surgery. It was originally used to treat problems like unequal leg length, but since the 1980s is most commonly used to treat issues like hemifacial microsomia, micrognathism (chin so small it causes health problems), craniofrontonasal dysplasias, craniosynostosis, as well as airway obstruction in babies caused by glossoptosis (tongue recessed too far back in the mouth) or micrognathism.

In 2016 a systematic review of papers describing bone and soft tissue outcomes of DO procedures on the lower jawbone was published; the authors had planned to do a meta-analysis but found the studies were too poor in quality and too heterogeneous to pool. From what they were able to generalize, the authors found there was significant relapse in the vertical plane for bone, and a higher risk of relapse when there was an initial high gonial angle or Jarabak ratio (sella–gonion/nasion–menton). For soft tissue, little evidence was available regarding the vertical dimension, while a 90% correspondence between skeletal and soft tissue was found for sagittal positioning; the dental-to-soft tissue agreement was around 20%.

A 2016 Cochrane review of DO on the upper jawbone to treat cleft lip and cleft palate compared with orthognathic surgery found only one study, involving 47 participants and performed between 2002 and 2008 at the University of Hong Kong. This was not sufficient evidence from which to generalize, but the authors noted that while both procedures produced notable hard and soft tissue improvements, the DO group had greater advancement of the maxillary and less horizontal relapse five years after surgery. There was no difference in speech or nasal emissions outcomes nor in adverse effects; the DO group had lower satisfaction at three months after surgery but higher at two years.

Distraction osteogenesis

Procedure

In the first phase, called the “osteotomy/surgical phase”, the bone is cut, either partially, only through the hard exterior, or completely, and a device is fitted which will be used in the next phases. In the second phase, the latency period, which lasts generally seven days, the appliance is not activated and early stages of bone healing are allowed. In the third phase, the “distraction phase”, the device, which is mounted to the bone on each side of the cut, is used to gradually separate the two pieces, allowing new bone to form in the gap. When the desired or possible length is reached, which usually takes three to seven days, a consolidation phase follows in which the device keeps the bone stable to allow the bone to fully heal. After the consolidation phase, the device is removed in a second surgical procedure.

The device that is used is usually manually operated by twisting a rod that through a rack and pinion system or the like, separates the bone; the rate of separation is carefully determined because going too quickly can cause nonunion, in which unstable fibrous connective tissue is formed instead of bone, and going too slowly can allow premature union to occur. Generally the rate is about a millimeter per day, achieved in two steps per day. The frequency of steps and how much the device is moved at each step, is called the “rhythm”. The devices sometimes contain a spring that provides tension to continually separate the bones, instead of being manually operated at set intervals.

 

Distraction osteogenesis


Despite these manually operated systems there are also motorized systems like the FITBONE from WITTENSTEIN. The FITBONE is a fully implantable, motorized, lengthening and correction nail. Advantages of this device are accurate deformity correction, low scar tissue formation, and reduced risk of infection. Furthermore the patients describe the procedure as more comfortable than limb lengthening with mechanical systems.

Content credit to wikipedia.org

Image credit to researchget.net

FEMECOT 2019

FEMECOT 2019

We participated in Femecot 2019  Event held in Hermosillo,sonora Mexico from 30th October to 1st November, 2019.

We exhibited our Spinal Implants, Trauma implants, Intramedullary nailing system &  Hip & Knee Replacement system and instruments.

VOSCON 2019

VOSCON 2019

We participated in VOSCON 2019  Event held at City Sports Club(CSC) resort, NH-6, Amravti Road, Akola on 19th & 20th October 2019.

We exhibited our Spinal Implants, Trauma Implants, Intramedullary Nailing system, Hip & Knee Replacement System and instruments.

OASISCON 2019

OASISCON 2019 to be held at Hotel Anandha Inn and convention centre, Puducherry From 23th to 25Th August 2019.We exhibited all our Orthopaedic Implants(Products) & Instruments.

You know what is Minimally Invasive Spine Surgery?

Spine surgery has advanced dramatically with the technology surrounding minimally invasive surgical (MIS) techniques. Surgical materials, nerve monitoring, and computer-aided navigation have improved significantly recently. With these techniques, the risks, recovery time, and surgical complications have decreased greatly.

Minimally Invasive Spine Surgery

For some patients who have spinal instability or have been recommended spinal fusion, it is important to understand what minimally invasive options may be available.

Advances in spine imaging, such as MRI, allow surgeons to see smaller and smaller spinal problems. Individual spinal nerves, bone spurs, and small disc fragments can be easily seen and diagnosed. Similarly, spinal surgery techniques have advanced to the point where some procedures involve incisions less than 1 inch.

Many modern techniques can be described as “minimally invasive” surgery, or “MIS.” For some patients, a minimally invasive procedure may be a better surgical option than a traditional or “open” spinal surgery. Instead of removing muscle attachments from bones, a minimally invasive surgery spreads and pushes muscles out of the way.

X-rays, computer-aided navigation techniques, and specialized tubes or retractors with special cameras or microscopes have led to major advances in the capabilities of MIS surgery. In addition to a smaller incision, MIS surgery has several advantages. It has been shown, on average, to cause decreases in blood loss, post-operative pain and narcotic use, soft tissue damage, and number of days spent in the hospital. On average, patients have a faster recovery, and return to normal activity and work faster.

In general, most spinal surgery can be grouped into 2 categories:

  1. Decompression
  2. Fusion

Procedures to decompress nerves of the spine include removing: herniated discs, enlarged ligaments and soft tissue, and bone spurs that are pressing on spinal nerves. In some cases, motion of the spine may become unstable or painful, either from wear and tear, trauma, or from a decompression procedure. These patients may be offered spinal fusion. There are MIS options and techniques available for both types of spinal surgery.

Minimally Invasive Decompression

A normal spinal canal is filled with fluid that surrounds the spinal cord and nerves. As the spine degenerates, spinal joints get bigger (just like the knuckles on our fingers), and discs may collapse or bulge. As this happens, room for the spinal cord and roots decreases and this may lead to pain or weakness in the legs. In severe cases, a minimally invasive surgical procedure may not be an option, and an “open” procedure may be the best choice to remove arthritic bone spurs. However, for some patients where spinal stenosis is in only 1 or 2 levels, a minimally invasive surgery may be a better option with a quicker recovery.

Bone spurs and arthritis is removed from the spine where nerves are compressed using a tube or retractor that is often less than an inch in diameter. A high-powered surgical microscope is used through the tube so that the nerves can be safely seen and protected throughout the operation. This smaller incision, less muscle disruption, and preservation of more of the patient’s anatomy may lead to a quicker recovery, and physical therapy can begin sooner.

Minimally Invasive Spinal Fusion

Spinal fusion is always a major undertaking, and any patient considering it should understand the risks and recovery involved. Damage to nerves, infection, failure of bones to fuse properly, or the need for more surgery is all included in the risks of a minimally invasive or traditional “open” surgery. For this reason, it is important that patients consider and fail all possible non-surgical or “conservative” methods with their surgeon before making the decision to undergo spine surgery. These non-surgical treatments include physical therapy, heat/ice, anti-inflammatory or neurologic-acting medication, bracing, or spinal injections before surgery.

Instrumentation used to fuse vertebrae together is placed under x-ray guidance through small and specialized retractors, with an incision about an inch and a half or less in length. Through the same retractors, bone spurs are removed, and spinal nerves are decompressed using a high-powered surgical microscope. For these patients, a smaller incision and less muscle disruption may lead to a quicker recovery and less post-operative pain.

The final tube requires an incision that is less than one inch, and minimizes soft tissue damage.

The final tube requires an incision that is less than one inch, and minimizes soft tissue damage. Reprinted with permission © bjerkespine.comWhen spine surgery is recommended, it is important for patients to discuss minimally invasive options with their surgeon.

Minimally invasive surgery, or “MIS,” is not the right option for all patients. It is important to understand why you may not be a candidate for MIS. Some surgeons have not been trained using these techniques, and do not offer them even though their patients may benefit. Before undergoing a spinal surgery, you should have a good understanding of the procedure itself and what to expect during the recovery process. Since pain and recovery are personal and individualized for each patient, no surgeon can guarantee a particular recovery course. However, for many patients, an MIS option may result in a smoother and more successful outcome.

What are the Most Common Types of Orthopedic Surgery?

An orthopedic surgery is any operation performed on the musculoskeletal system. This system is comprised of your bones, muscles, ligaments, joints and tendons. There are three different types of orthopedic surgery. Traditional procedures are now competing with minimally invasive arthroscopic surgeries that tout less pain and quicker recovery times.

Let’s take a look at the most commonly performed orthopedic procedures.

    • Joint Replacement Procedures. These procedures replace an injured joint with a prosthetic and are among the most common orthopedic operations. Common joint replacement surgeries include hip and knee replacement surgeries. It is important that patients are monitored for signs of complications after these procedures because the procedures carry a considerable amount of risk. Among these risks are the chances that the implant will fail or that the materials making up the implant will make their way into the blood, causing a toxic condition known as metalosis.
    • Revision Joint Surgery. If an existing implant has failed, it may be necessary to remove it and implant a new one. Revision surgeries are often required when the patient received a defective implant or an older implant has failed.
    • Debridement. Whenever tissue death has occurred and the affected tissue needs to be removed before healing can occur, a debridement procedure is how doctors will remove it. There are some cases where bone is also removed when necessary.
    • Spinal Fusion. Spinal fusions join the vertebrae together to provide more stability to the spine or to repair damage to the spine.
    • Bone Fusion. Like spinal fusions, bone fusions use grafting to fuse fractured bones together so that they can heal.
    • Soft tissue repair. These procedures focus on torn ligaments or tendons.
    • Internal Fixation of Bones. This type of surgery places fragments of bones together and keeps them in place using pins, screws or plates so that they can heal. In some cases, the devices will remain inside of the body.
    • Osteotomy. If a child has bone deformities, he or she will need this type of operation to help correct the deformity so that the bone grows properly.

From : www.rosenfeldinjurylawyers.com

MOARCON 2019

We participated in MOARCON  2019  Event held in NASIK from 1st to 3rd  March, 2019.

We exhibited all our Products & Instruments.

    We offer a wide variety of safe and advanced Orthopedic Implants and fixators. At the helm of the company’s operations is Mr. Vinodbhai, the Director. His enterprising skills and experience in the industry continue to play a pivotal role in the company’s growth.We are based in Ahmedabad city West Part of India.

    ADDRESS

    Plot No.10, Phase-1, B|h. Prashant Eng., G.I.D.C.Vatva, Ahmedabad-382 445, Gujarat, (INDIA).

    PHONE

    +91 9375801932

    EMAIL

    [email protected]

    Cart